M8 - 16 Pin needle Cartridge

DO NOT USE

• On broken skin or open wounds
• On active acne or irritated skin
• Please refer to our instruction guide for the full list of contraindications 
• 16-pin cartridges are not suitable for hair loss application

Note: M8 cartridges are exclusively compatible with the Dr. Pen M8 microneedling pen and should not be used with any other Dr. Pen Microneedling pen models. Each microneedling pen is designed to work with its specific cartridge.

Important: Microneedling cartridges must be sterilized before each use to ensure the treatment is safe and hygienic. It is essential to follow these steps carefully to ensure that the microneedling cartridges are properly sterilized. Here are the steps to sterilize microneedling cartridges:

1. First, ensure that you have all the necessary sterilization equipment: gloves, an isopropyl alcohol solution (70% or above), and a clean container to hold the solution.
2. Put on your gloves to avoid contaminating the cartridges during the sterilization process.
3. Check on your cartridge; ensure the needles are in perfect condition (i.e. not bending) and remove any debris.
4. Pour enough alcohol solution into the container, dip the cartridge needle into a sterilization container, and soak for a couple of minutes.
5. If you have alcohol solution in a spray model, you can spray it towards the cartridge's needle head.
6. Once the sterilization is complete, allow the cartridge to air dry before using it.
7. Finally, your cartridge is ready for use.